Seni Bekliyoruz!
Devamı...
Sevgili üniversite adayları!
Bizi daha yakından tanımak için tıklayın!
2023 Mezunları
Olağanüstü başarınız için sizi tebrik ediyor, gelecekte karşınıza çıkabilecek zorluklar ve fırsatlar için en içten dileklerimizle başarı ve şans diliyoruz.

Bilimsel Yayınlar

Dergi Editörler Kurulu Üyelikleri

       

Makaleler

  • Dasdemir, E., Batta, R., Köksalan M., Tezcaner Öztürk, D., "UAV routing for reconnaissance mission: A multi-objective orienteering problem with time-dependent prizes and multiple connections", COMPUTERS & OPERATIONS RESEARCH, 105882 (2022)
  • Dasdemir, E., Testik, M.C., Tezcaner Öztürk, D., Tuncer Sakar, C., Guleryuz G., Aydin O. M., “A Multi-objective open vehicle routing problem with overbooking: Exact and heuristic solution approaches for an employee transportation problem”, OMEGA - THE INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE, 108:102587 (2022)
  • Atalay, M., Murat, U., Oksuz, B., Parlaktuna, A.M., Pisirir, E., Testik, M.C. “Digital Twins in Manufacturing: Systematic Literature Review for Physical-Digital Layer Categorization and Future Research Directions”, INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, DOI: 10.1080/0951192X.2021.2022762- 1-28 (2022).
  • Gokbayrak K. "A two-level off-grid electric distribution problem on the continuous space". Computers & Operations Research, (2022)
  • Gokbayrak K., Avci H. "A voltage drop limited decentralized electric power distribution network". Computers and Operations Research, (2022)
  • Acar, B.A., Testik, M.C., Dinler, D. “Supplier Management by Distributing Orders Among New and Existing Suppliers: Methodology and Its Application to a Fast Fashion Company”, JOURNAL OF FASHION MARKETING AND MANAGEMENT (2022).
  • Güner, G. G., Tuncer Şakar, C., Yet, B. “A Multicriteria Method to Form Optional Preventive Maintenance Plans: A Case Study of a Large Fleet of Vehicles”, IEEE Transactions on Engineering Management, (2021)
  • Karakaya, G., Tuncer Şakar, C., “A New Interactive Algorithm for Continuous Multiple Criteria Problems: A Portfolio Optimization Example,” International Journal of Information Technology & Decision Making, 20(1), 371-398, (2021).
  • Hill, A., Joyner C.H., Keith-Jopp, C., Yet, B., Tuncer Şakar, C., Marsh, W., Morrissey, D., “A bayesian network decision support tool for low back pain using a RAND appropriateness procedure: proposal and internal pilot study”, JMIR Research Protocols, 10(1), (2021).
  • Testik, M.C., Sarikulak, O. “Change Points of Real GDP per Capita Time Series Corresponding to Periods of Industrial Revolutions”, TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE, 170, 120911, 1-8 (2021).
  • Weiss, C.H., Testik, M.C., Homburg, A. “On the Design of Shewhart Control Charts for Count Time Series under Estimation Uncertainty”, COMPUTERS AND INDUSTRIAL ENGINEERING, 157, 107331, 1-8 (2021).
  • Saha, R., Testik, F.Y., Testik, M.C. “Measurement System Analysis of Ott Pluvio2 Weighing Rain Gage for Rain Intensity Measurements”, JOURNAL OF ATMOSPHERIC AND OCEANIC TECHNOLOGY, 38 (4), 897-908 (2021).
  • Testik, M.C., Kara, O., Knoth, S. “An Algorithmic Approach to Outlier Detection and Parameter Estimation in Phase I for Designing Phase II EWMA Control Chart”, COMPUTERS AND INDUSTRIAL ENGINEERING, 144, 106440, 1-14 (2020).
  • Testik, M.C. “Discussion on Experiences with Big Data: Accounts from a Data Scientist’s Perspective”, QUALITY ENGINEERING, 32 (4), 553-555 (2020).
  • Atalay, M., Testik, M.C., Duran, S., Weiss, C.H. “Guidelines for Automating Phase I of Control Charts by Considering Effects on Phase II Performance of Individuals Control Chart”, QUALITY ENGINEERING, 32 (2), 223-243 (2020).
  • Yet, B., Tuncer Şakar, C., “Estimating Criteria Weight Distributions in Multiple Criteria Decision Making: A Bayesian Approach,” Annals of Operations Research, 293(2), 495-519, (2020).
  • Ekiz, M. K., Tuncer Şakar, C., “A new DEA approach to fully rank DMUs with an application to MBA programs,” International Transactions in Operational Research, 27(4), 1886-1910, (2020).
  • Ekiz, M. K., Tuncer Şakar, C., “A New Approach to Rank All Alternatives in Data Envelopment Analysis: ASES,” Journal of the Faculty of Engineering and Architecture of Gazi University, 27(4), 683-695, (2020).
  • Weiss, C.H., Testik, M.C. “Risk-Based Metrics for Performance Evaluation of Control Charts”, QUALITY AND RELIABLILITY ENGINEERING INTERNATIONAL, 35, 280-291 (2019).
  • Karakaya, G., Tuncer Şakar, C., “An interactive ranking-based multi-criteria choice algorithm with filtering: Applications to university selection,” METU Studies in Development, 46(1), (2019).
  • Tuncer Şakar, C., Karakaya, G., “An interactive approach with filtering to find a preferred solution of a decision maker,” Journal of the Faculty of Engineering and Architecture of Gazi University, 34(4), 1987-2005, (2019).
  • Weiss, C.H., Steuer, D., Jentsch, C., Testik, M.C. “Guaranteed Conditional ARL Performance in the Presence of Autocorrelation”, COMPUTATIONAL STATISTICS AND DATA ANALYSIS, 128, 367-379 (2018)
  • Çarman, F., Tuncer Şakar, C., “An MCDM-integrated maximum coverage approach for positioning of military surveillance systems,” Journal of the Operational Research Society, 70(1), 162-176, 2019.
  • Testik, M.C., Weiss, C.H., Koca, Y., Testik, O.M. “Effectiveness of Phase I Applications for Identifying Randomly Scattered Out‐of‐Control Observations and Estimating Control Chart Parameters”, QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 34, 78-92 (2018).
  • Sonmez, V., Testik, M.C., Testik, O.M. “Overall equipment effectiveness when production speeds and stoppage durations are uncertain”, THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 95, 121-130 (2018).
  • Tuncer Sakar C., Yet B., “Çok Kriterli Karar Verme Problemlerinde Fayda Fonksiyonu Agirliklarinin Tahmin Edilmesi için Matematiksel Model Temelli bir Yöntem”, ULUDAG UNIVERSITY JOURNAL OF THE FACULTY OF ENGINEERING, 23(1), 379-402 (2018).
  • Sonmez, V., Testik, M.C., Testik, O.M. “Overall Equipment Effectiveness When Production Speeds and Stoppage Durations are Uncertain”, THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, (Accepted, 2018)
  • Testik, M.C., Weiss, C.H., Koca, Y., Testik, O.M. “Effectiveness of Phase I Applications for Identifying Randomly Scattered Out-of-Control Observations and Estimating Control Chart Parameters”, QUALITYAND RELIABILITY ENGINEERING INTERNATIONAL, 34, 78-92 (2018).
  • Testik, M.C., Weiss, C.H., Koca, Y., Testik, O.M. " Assessment of Shewhart Control Chart Limits in Phase I Implementations under Various Shift and Contamination Scenarios", FRONTIERS IN STATISTICAL QUALITY CONTROL 12, eds. S. Knoth, W. Schmid, Springer (2018).
  • Barenji, R. V. "Effect of reinforcement amount, mold temperature, superheat, and mold thickness on fluidity of in-situ Al-Mg 2 Si composites." China Foundry 15.1, 66-74 (2018)
  • Nejad, M. G., Kovács, G., Vizvári, B., & Barenji, R. V. "An optimization model for cyclic scheduling problem in flexible robotic cells." The International Journal of Advanced Manufacturing Technology 95.9-12, 3863-3873 (2018)
  • Ghadiri Nejad, M., Güden, H., Vizvári, B., & Barenji, R. V. "A mathematical model and simulated annealing algorithm for solving the cyclic scheduling problem of a flexible robotic cell." Advances in Mechanical Engineering 10.1 (2018).
  • Nejad, M. G., Shavarani, S. M., Vizvári, B., & Barenji, R. V. "Trade-off between process scheduling and production cost in cyclic flexible robotic cells." The International Journal of Advanced Manufacturing Technology 96.1-4, 1081-1091 (2018).
  • Barenji, R. V. , Mazyar Ghadiri Nejad, and Iraj Asghari. "Optimally sized design of a wind/photovoltaic/fuel cell off-grid hybrid energy system by modified-gray wolf optimization algorithm." Energy & Environment (2018).
  • Barlow E., Tezcaner Öztürk D., Revie M., Akartunali K., Day A. H., and Boulougouris E. “A Mixed-Method Optimisation and Simulation Framework for Supporting Logistical Decisions during Offshore Wind Farm Installations”, EUROPEAN JOURNAL OF OPERATIONAL design/research 264 (3), 894-906 (2018).
  • Yet B, Neil M, Fenton N, Constantinou A, Dementiev E. “An Improved Method for Solving Hybrid Influence Diagrams”, International Journal of Approximate Reasoning, 95, pp. 93-112. (2018).
  • Yet B, Constantinou A, Neil M, Fenton N. “Expected Value of Partial Perfect Information in Hybrid Models using Dynamic Discretization”, IEEE Access, 6, pp. 7802-7817. (2018).
  • Karabiyik M, Yet B (2018). “Bayes Aglari ile Futbol Analitigi: FutBA Modeli”, Pamukkale University Journal of Engineering Sciences. DOI: 10.5505/pajes.2018.12979
  • Koca, Y., Testik, Ö.M., “Solving Two-Player Zero Sum Games with Fuzzy Payoffs when Players have Different Risk Attitudes”, QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, DOI: 10.1002/qre.2322
  • Shaygan, A., Testik, Ö.M., “A Fuzzy AHP Based Methodology For Project Prioritization and Selection”, SOFT COMPUTING, DOI 10.1007/s00500-017-2851-9
  • Akan A.P., Testik Ö.M., "A General Approach to Accreditation of Environmental Laboratories in Turkey", INTERNATIONAL JOURNAL OF ENGINEERING TECHNOLOGIES, (4), 2018
  • Akan A.P., Testik Ö.M., "A General Approach to Accreditation of Environmental Laboratories in Turkey", International Journal of Engineering Technologies, vol.4, No:2, pp:102-106, 2018
  • Sonmez, V. and TESTIK, M. C. “Using accurately measured production amounts to obtain calibration curve corrections of production line speed and stoppage duration consisting of measurement errors,” THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol. 88, no. 9–12, pp. 3257–3263, Feb. 2017.
  • Testik, M.C. “Interview: Model Factory”, ANAHTAR DERGISI, 348, 10-12 (2017) – in Turkish
  • Barenji, A.V. Barenji, R. V., Roudi, D., & Hashemipour, M "A dynamic multi-agent-based scheduling approach for SMEs." The International Journal of Advanced Manufacturing Technology 89.9-12, 3123-3137 (2017)
  • Bijanrostami, Khosro, and Barenji, R. V.. "Underwater dissimilar friction stir welding of aluminum alloys: Elucidating the grain size and hardness of the joints." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2017): 1464420716686625.
  • Bijanrostami, Kh, Barenji, R. V., and M. Hashemipour. "Effect of Traverse and Rotational Speeds on the Tensile Behavior of the Underwater Dissimilar Friction Stir Welded Aluminum Alloys." Journal of Materials Engineering and Performance 26.2, 909-920 (2017)
  • Barenji, A. V., and Barenji, R. V.. "Improving multi-agent manufacturing control system by indirect communication based on ant agents." Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 231.6, 447-458 (2017)
  • Pourasla, Hamed H., Barenji, R. V., and Vahid M. Khojastehnezhad. "Elucidating the effect of electrical discharge machining parameters on the surface roughness of AISI D6 tool steel using response surface method." Indian Journal of Engineering & Materials Sciences 24, 83-90 (2017)
  • Barenji, R. V., Banu Yuksel Ozkaya, and Barenji, A. V. "Quantifying the advantage of a kitting system using Petri nets: a case study in Turkey, modeling, analysis, and insights." The International Journal of Advanced Manufacturing Technology 93.9-12, 3677-3691 (2017)
  • Barenji, R. V. "Casting fluidity, viscosity, microstructure and tensile properties of aluminum matrix composites with different Mg 2 Si contents." Rare Metals: 1-10, (2017)
  • Khojastehnezhad, Vahid M., Hamed H. Pourasl, and Barenji, R. V. "Effect of tool pin profile on the microstructure and mechanical properties of friction stir processed Al6061/Al2O3—TiB2 surface hybrid composite layer." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2017): 1464420717715048.
  • Köksalan M. and Tezcaner Öztürk D. “An Evolutionary Approach to Generalized Biobjective Traveling Salesperson Problem”, COMPUTERS AND OPERATIONS design/research 79, 304-313 (2017).
  • Aydin, O., Shaygan, A. Dasdemir, E., Soydan G. “Selecting Health Care Improvement Projects: A Methodology Integrating Cause-and-Effect Diagram and Analytical Hierarchy Process”, Quality Management in Health Care, 26.1 (2017): 40-48.
  • Yet B, Perkins ZB, Tai NR, and Marsh DWR (2017). “Clinical Evidence Framework for Bayesian Networks” Knowledge and Information Systems, 50(1), pp.117-143.DOI:10.1007/s10115-016-0932-1
  • Dursun T, Su Y, Cosgun R, Durak AS, Yet B (2017). “COTTAPP: An Online University Timetable Application based on a Goal Programming Model” International Journal of Intelligent Systems and Applications in Engineering, 5(3), pp. 117-128. DOI: 10.18201/ijisae.2017531426
  • Yet B (2017). “Bayesian Networks in Project Management” in Wiley StatsRef: Statistics Reference Online (John Wiley & Sons). 1-8. DOI:10.1002/9781118445112.stat07966
  • Özmodanli, Y. ve Testik, Ö.M., “TEKNOGIRISIMCILIK PROGRAMLARI IÇIN YAPISAL BIR ANALIZ”, VERIMLILIK DERGISI, T. C. Bilim, Sanayi ve Teknoloji Bakanligi Verimlilik Genel Müdürlügü, Ekim 2017, 2016/4; S: 47-79. ISSN 1013-1388
  • Akan, P. ve Aydin Testik, Ö.M., “Examination of the Accreditation Status of Water Quality Parameters”, TURJOEM, THE TURKISH JOURNAL OF OCCUPATIONAL / ENVIRONMENTAL MEDICINE AND SAFETY, Cilt: 2 Sayi 1; S:45-55. 2017. ISSN : 2149-4711.
  • Köksalan M., Tuncer Sakar C., “An interactive approach to stochastic programming based portfolio optimization”, ANNALS OF OPERATIONS design/research, 245(1-2), 47-66 (2016).
  • Dasdemir, E., Weiss, C.H., Testik, M.C., Knoth, S. "Evaluation of Phase I Analysis Scenarios on Phase II Performance of Control Charts for Autocorrelated Observations", QUALITY ENGINEERING, vol. 28, no. 3, pp. 293–304, Mar. 2016.
  • Testik, M.C. “Industrial Revolutions and Their Effects”, STANDARD, February/2016, 62-65 (2016). – in Turkish
  • R. B. Karaömer, O. Chouseinoglou, "Comparison of Non-Homogeneous Poisson Process Software Reliability Models in Web Applications", AJIT-e: Online Academic Journal of Information Technology (2016 Summer), vol. 7, num. 24, pp. 7-28, 2016 doi: http://dx.doi.org/10.5824/1309-1581.2016.3.001.x
  • G. Ögütçü, Ö. M. Testik, O. Chouseinoglou, "Analysis of personal information security behavior and awareness", Computers & Security (2016), vol. 56, pp. 83-93, 2016 doi: http://dx.doi.org/10.1016/j.cose.2015.10.002
  • Barenji, R. V. "Effect of tool traverse speed on microstructure and mechanical performance of friction stir welded 7020 aluminum alloy." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230.2, 663-673 (2016)
  • Barenji, R. V., M Khojastehnezhad, V., H Pourasl, H., & Rabiezadeh, A. "Wear properties of Al–Al2O3/TiB2 surface hybrid composite layer prepared by friction stir process." Journal of Composite Materials 50.11, 1457-1466 (2016)
  • Barenji, R. V.. "Influence of heat input conditions on microstructure evolution and mechanical properties of friction stir welded pure copper joints." Transactions of the Indian Institute of Metals 69.5, 1077-1085 (2016)
  • Barenji, A. V., Barenji, R. V., and Majid Hashemipour. "Flexible testing platform for employment of RFID-enabled multi-agent system on flexible assembly line." Advances in Engineering Software 9, 1-11 (2016)
  • Azizi, A., Barenji, R. V., Barenji, A. V., & Hashemipour, M. "Microstructure and mechanical properties of friction stir welded thick pure copper plates." The International Journal of Advanced Manufacturing Technology 86.5-8, 1985-1995 (2016)
  • Etminanfar, M. R., Khalil-Allafi, J., Montaseri, A., & Barenji, R. V. "Endothelialization and the bioactivity of Ca-P coatings of different Ca/P stoichiometry electrodeposited on the Nitinol superelastic alloy." Materials Science and Engineering: C 62, 28-35 (2016)
  • Barenji, R. V., Hamed H. Pourasl, and Vahid M. Khojastehnezhad. "Electrical discharge machining of the AISI D6 tool steel: Prediction and modeling of the material removal rate and tool wear ratio." Precision Engineering 45. 435-444 (2016)
  • Tezcaner Öztürk D. and Köksalan M. “An Interactive Approach for Biobjective Integer Programs under Quasiconvex Preference Functions,” ANNALS OF OPERATIONS design/research 244 (2), 677-696 (2016).
  • Yet B, Constantinou A, Fenton N, Neil M, Luedeling E, Shepherd K (2016). “A Bayesian Network Framework for Project Cost, Benefit and Risk Analysis with an Agricultural Development Case Study” Expert Systems with Applications, 60, pp.141-155. DOI:10.1016/j.eswa.2016.05.005.
  • Fenton N, Neil M, Lagnado D, Marsh W, Yet B, Constantinou, A (2016). “How to model mutually exclusive events based on independent causal pathways in Bayesian network models” Knowledge-Based Systems, 113, pp.39-50. DOI:10.1016/j.knosys.2016.09.012
  • Marsh DWR, Nur K, Yet B, Majumdar A (2016). “Using operational data for decision making: a feasibility study in rail maintenance” Safety and Reliability, 36(1), pp.35-47. DOI:10.1080/09617353.2016.1148923
  • Koç, S. ve Testik, Ö.M., “Mobilya Sektöründe Yasanan Kas-Iskelet Sistemi Risklerinin Farkli Degerlendirme Metotlari Ile Incelenmesi ve Minimizasyonu”, ENDÜSTRI MÜHENDISLIGI DERGISI, Nisan-Mayis-Haziran 2016, Cilt: 27 Sayi: 2 S: 2-27.
  • Özmodanli, Y. ve Testik, Ö.M., “Girisimci Destek Programlarinin Incelenmesi Ve Teknogirisim Destegi Programi”, VERIMLILIK DERGISI, T. C. Bilim, Sanayi ve Teknoloji Bakanligi Verimlilik Genel Müdürlügü, Ocak 2016, 2016/1; S:103- 130.
  • Weiss, C.H., Testik, M.C. “Residuals-based CUSUM Charts for Poisson INAR(1) Processes”, JOURNAL OF QUALITY TECHNOLOGY, 47 (1), 30-42 (2015).
  • Weiss, C.H., Testik, M.C. “On the Phase I Analysis for Monitoring Time-Dependent Count Processes”, IIE TRANSACTIONS, 47 (3), 294-306 (2015).
  • Sonmez, V., Testik, M.C. “An Information System Framework for Monitoring the Performance of Machines in a Continuous Production Line”, THE JOURNAL OF DEFENSE SCIENCES, 14 (2) November/2015, 111-140 (2015) - in Turkish with extended summary in English
  • Testik, M.C. “Quality and Conformity Assessment Engineering: Expertise Requirements”, STANDARD, 54 (630) May/2015, 56-58 (2015). – in Turkish
  • Testik, O.M., Testik, M.C. " Industrial Engineering Perspective for Evaluating and Suggesting Solutions to the Use of Transportation Systems by Elderlies ", Geriatric Sciences, ed. Terken Baydar and Zahide Tuncbilek, 77-81, GEBAM, Turkey (2015). – in Turkish
  • Vatankhah Barenji, Reza, Majid Hashemipour, and David A. Guerra-Zubiaga. "A framework for modelling enterprise competencies: from theory to practice in enterprise architecture." International Journal of Computer Integrated Manufacturing 28.8, 791-810 (2015)
  • lkhichi, A. R., Soufi, R., Hussain, G., Barenji, R. V., & Heidarzadeh, A."Establishing mathematical models to predict grain size and hardness of the friction stir-welded AA 7020 aluminum alloy joints." Metallurgical and Materials Transactions B 46.1, 357-365 (2015)
  • Heidarzadeh, A., Barenji, R. V., Esmaily, M., & Ilkhichi, A. R. "Tensile properties of friction stir welds of AA 7020 aluminum alloy." Transactions of the Indian Institute of Metals 68.5, 757-767 (2015)
  • Farhanchi, M., Neysari, M., Barenji, R. V., Heidarzadeh, A., & Mousavian, R. T."Mechanical activation process for self-propagation high-temperature synthesis of ceramic-based composites." Journal of Thermal Analysis and Calorimetry 122.1, 123-133 (2015)
  • Golezani, A. S., Barenji, R. V., Heidarzadeh, A., & Pouraliakbar, H. "Elucidating of tool rotational speed in friction stir welding of 7020-T6 aluminum alloy." The International Journal of Advanced Manufacturing Technology 81.5-8, 1155-1164 (2015)
  • Khandan, A., Abdellahi, M., Barenji, R. V., Ozada, N., & Karamian, E. "Introducing natural hydroxyapatite-diopside (NHA-Di) nano-bioceramic coating." Ceramics International 41.9, 12355-12363 (2015)
  • Barlow E., Tezcaner Öztürk D., Revie M., Boulougouris E., Day A. H., and Akartunali K. “Exploring the Impact of Innovative Developments to the Installation Process for an Offshore Wind Farm,” OCEAN ENGINEERING 109, 623-634 (2015).
  • Özmodanli, Y. ve Testik, Ö.M., “Teknogirisim Sermaye Destegi Programi’nda Etkinlik ve Verimliligin Artirilmasina Yönelik Bir Yapilanma Önerisi: TEGIM (Teknogirisim Merkezi)” KALKINMADA ANAHTAR VERIMLILIK, T.C. Bilim, Sanayi ve Teknoloji Bakanligi, Mayis 2015, Yil:27, Sayi:317, S:24-29.
  • Tuncer Sakar C., Köksalan M. “Effects of Multiple Criteria on Portfolio Optimization”, INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY AND DECISION MAKING, 13(1), 77-99 (2014).
  • Cangoz, B., Gokce Kutsal, Y., Erdil, F., Rakicioglu, N., Baydar, T., Hersek, N., Ozbek, M., Bilir, N., Babaogul, M., Güven, S., Erden Aki, O., Testik, M.C. “Yeni Baslangiçlara Hazir miyiz? Bir Üniversitenin 60 Yas Üzeri Akademik ve Idari Personelinin Emeklilik ile Ilgili Algi ve Görüsleri; Betimsel Bir Arastirma”, SUREKLI TIP EGITIMI DERGISI - STED, 23, 39-49 (2014). – in Turkish
  • Özer, Ö., Kar, A., Songur, C., Sönmez, V. and Sahin, I., “A Simulation Modelling Study: The Case of Department of Gynecology and Obstetrics of A University Hospital, Turkey”, EGE ACADEMIC REVIEW, 14, no. 4, 531 (2014)
  • Barenji, Reza Vatankhah, Ali Vatankhah Barenji, and Majid Hashemipour. "A multi-agent RFID-enabled distributed control system for a flexible manufacturing shop." The International Journal of Advanced Manufacturing Technology 71.9-12,1773-1791 (2014)
  • Barenji, Ali Vatankhah, Reza Vatankhah Barenji, and Majid Hashemipour. "A frameworks for structural modelling of an RFID-enabled intelligent distributed manufacturing control system." South African Journal of Industrial Engineering 25.2, 48-66 (2014)
  • Dehnokhalaji, A., Korhonen P., Köksalan M., Nasrabadi N., Tezcaner Öztürk D. and Wallenius J. “Constructing a Strict Total Order for Alternatives Characterized by Multiple Criteria: An Extension,” NAVAL design/research LOGISTICS 61 (2), 155-163 (2014).
  • Tuncer Sakar C., Köksalan M. “A Stochastic Programming Approach to Multicriteria Portfolio Optimization”, JOURNAL OF GLOBAL OPTIMIZATION, 47, 299-317 (2013).
  • Ö. M. Aydin, O. Chouseinoglou, "Fuzzy Assessment of Health Information System Users' Security Awareness", Journal of Medical Systems (2013), December 2013, vol. 37, issue 6, Springer. doi: http://dx.doi.org/10.1007/s10916-013-9984-x
  • Yontay, P., Weiss, C.H., Testik, M.C., Bayindir, Z.P. "A Two-Sided CUSUM Chart for First-Order Integer-Valued Autoregressive Processes of Poisson Counts", QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 29 (1), 33-42 (2013).
  • Simsek, B., Pakdil F., Dengiz, B., Testik, M.C. "Driver performance appraisal using GPS terminal measurements: A conceptual framework", TRANSPORTATION design/research PART C, 26 (2013) 49-60 (2013).
  • Aydın, Ö. M., O. Chouseinoglou, "Fuzzy Assessment of Health Information System Users' Security Awareness", JOURNAL OF MEDICAL SYSTEMS 37 (6), (2013).
  • Chouseinoglou, O., D. İren, N.A. Karagöz, S. Bilgen, "AiOLoS: A model for assessing organizational learning in software development organizations", INFORMATION AND SOFTWARE TECHNOLOGY, 55 (11), 1904-1924, (2013)
  • Weiss, C.H., Testik, M.C. "Detection of Abrupt Changes in Count Data Time Series: Cumulative Sum Derivations for INARCH(1) Models", JOURNAL OF QUALITY TECHNOLOGY, 44 (3), 249-264 (2012).
  • Maros, T., Vladimir, B., Testik, M.C. "Monitoring Chenille Yarn Defects Using Image Processing with Control Charts", TEXTILE design/research JOURNAL, 81(13) 1344-1453 (2011).
  • Koksal, G., Batmaz, I., Testik, M.C. "A Review of Data Mining Applications for Quality Improvement in Manufacturing Industry", EXPERT SYSTEMS WITH APPLICATIONS, 38, 13448-13467 (2011).
  • Tezcaner D. and Köksalan M. “An Interactive Algorithm for Multi-Objective Route Planning,” JOURNAL OF OPTIMIZATION THEORY AND APPLICATIONS 150 (2), 379–394 (2011).
  • Weiss, C.H., Testik, M.C. "The Poisson INAR(1) CUSUM Chart under Overdispersion and Estimation Error", IIE TRANSACTIONS, 43, 805-818 (2011).
  • Testik, M.C., Özkaya, B.Y., Aksu, S., Özcebe, O.I. "Discovering Blood Donor Arrival Patterns Using Data Mining: A Method to Investigate Service Quality at Blood Centers", JOURNAL OF MEDICAL SYSTEMS (2010). DOI 10.1007/s10916-010-9519-7.
  • Özkaya, B.Y., Testik, M.C. "On the Expected Parts Per Million Nonconforming Levels Obtained from Estimated Process Capability Indices", QUALITYAND RELIABILITY ENGINEERING INTERNATIONAL (published online, 2010). DOI: 10.1002/qre.1156.
  • Pehlivan, C., Testik, M.C.," Impact of Model Misspecification on the Exponential EWMA Charts: A Robustness Study When the Time-Between-Events are not Exponential ", QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 26, 177-190 (2010).
  • Özsan, G., Testik, M.C., Weiss, C.H. "Properties of the Exponential EWMA Chart with Parameter Estimatation", QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 26, 555-569 (2010).
  • Weiss, C.H., Testik, M.C. "CUSUM Monitoring of First-Order Integer-Valued Autoregressive Processes of Poisson Counts", JOURNAL OF QUALITY TECHNOLOGY, 41, 389-400 (2009).
  • Köksalan M., Tuncer Sakar C., “A DEA Based Approach to Ranking Multi Criteria Alternatives”, INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY AND DECISION MAKING, 8(1), 29-54 (2009).
  • Arslan, G., Aydin, O.M, "A NEW SOFTWARE DEVELOPMENT FOR FUZZY MULTICRITERIA DECISION-MAKING", TECH EC D E, Vol.15, Is.2, p.197-212, (2009)
  • Testik, M.C. (2008) , Direct Smoothing Method for Detection of Fault Patterns , International Journal of Natural and Engineering Sciences 2 (1): 01-08, 2008
  • Koksal, G., B. Kantar, T. Ula, and M.C. Testik, "The Effect of Phase I Sample Size on the Run Length Performance of Control Charts for Autocorrelated Data", Journal of Applied Statistics, 2008
  • Aydin, O.M, Apaydin, A, "MULTI-CHANNEL FUZZY QUEUING SYSTEMS AND MEMBERSHIP FUNCTIONS OF RELATED FUZZY SERVICES AND FUZZY INTER-ARRIVAL TIMES", ASIA P J OP, Vol.25, Is.5, P.697-713, (2008)
  • Aydin, O, "Fmcdm for personnel assignment in Turkish armed forces", ASIA P J OP, Vol.25, Is.1, P.75-87, (2008)
  • Gurler, U and Ozkaya, B.Y., Analysis of the (s, S) Policy for Perishables with Random Shelflife. to appear in IIE Transactions
  • Melvin, J., Keskinocak, P., Koenig, S., Tovey, C. and Ozkaya, B.Y., Coordinating Robot Teams in the Presence of Disjoint Time Windows. to appear in IEEE Transactions on Intelligent Robots and Systems
  • Testik, M.C. and G.C. Runger, "Multivariate CUSUM", Encyclopedia of Quality and Reliability, 2007
  • Testik, M.C.,"Conditional and Marginal Performance of the Poisson CUSUM Control Chart with Parameter Estimation", International Journal of Production design/research,45,5621-5638 (2007)
  • Rao, C., Yardim, N., Basara, BB., Mollahaliloglu, S., Lopez, AD., Akgun, S., Aydin, O., "Estimating mortality and causes of death in Turkey: methods, results and policy implications", EUR J PUB H, Vol.17, Is.6, P.593-599, (2007)
  • Pakdil, F., Aydin, O., "Expectations and perceptions in airline services: An analysis using weighted SERVQUAL scores", J AIR TRANS, Vol.13, Is.4, P.229-237, (2007)
  • Ozkaya, B.Y., Gurler, U. and Berk, E., A New Policy for the Stochastic Joint Replenishment Problem: Analysis and Insights. Naval design/research Logistics, 53, 525-546, 2006
  • Testik, M.C., B.D. McCullough and C.M. Borror, "The Effect of Estimated Parameters on Poisson EWMA Control Charts", Quality Technology and Quantitative Management, 3, 513-527 (2006).
  • Testik, M.C. and G.C. Runger, "Multivariate One-Sided Control Charts", IIE Transactions, 38, 635-645 (2006). (This article is highlighted by the Editor-in-Chief Candi Yano in the design/research column of “Industrial Engineer” magazine’s August 2006 issue distributed to all members of The Institute of Industrial Engineers, which is the world's largest professional membership society dedicated solely to the support of the industrial engineering profession and individuals involved with improving quality and productivity.) http://www.iienet.org/magazine/magazinefiles/ie%20aug%2006reasch%20p48%2Epdf
  • Runger, G.C., M.C. Testik and F. Tsung, "Relationships Among Control Charts Used with Feedback Control", Quality and Reliability Engineering International, 22, 877-887 (2006).
  • Testik, M.C.,"Model Inadequacy And Residuals Control Charts for Autocorrelated Processes", Quality and Reliability Engineering International, 21, 115-130 (2005).
  • Testik, M.C., G.C. Runger, B. Kirkman-Liff and E.A. Smith, "Data Mining and Knowledge Discovery in Healthcare Organizations: A Decision-Tree Approach", Creating Knowledge Based Healthcare Organizations, ed. N. Wickramasinghe, J. Gupta ve S. Sharma, 78-90, Idea Group Publishers, Philadelphia, (2004).
  • Testik, M.C., J.K. Cochran and G.C. Runger, "Adaptive Server Staffing in the Presence of Time-Varying Arrivals: A Feed-forward Control Approach", Journal of the Operational design/research Society, 55, 233-239 (2004).
  • Testik, M.C. and C.M. Borror, "Design Strategies for the Multivariate Exponentially Weighted Moving Average Control Chart", Quality and Reliability Engineering International, 20, 571-577 (2004).
  • Runger, G.C. and M.C. Testik," Multivariate Extensions to Cumulative Sum Control Charts", Quality and Reliability Engineering International, 20, 587-606 (2004)
  • Gurler, U. and Ozkaya, B.Y., A Note on “Continuous Review Perishable Inventory Systems: Models and Heuristics”, IIE Transactions, 35, 321-323, 2003
  • Testik, M.C., G.C. Runger and C.M. Borror, "Robustness Properties of Multivariate EWMA Control Charts", Quality and Reliability Engineering International, 19, 31-38 (2003)
  • Runger, G.C. and M.C. Testik, "Control Charts for Monitoring Fault Signatures: Cuscore versus GLR", Quality and Reliability Engineering International, 19, 387-396 (2003).
  • Testik, M.C. and G.C. Runger, "Mining Manufacturing Quality Data", The Handbook of Data Mining, ed. N. Ye, 657-668, Lawrence Erlbaum Associates Publishers, New Jersey, (2003).
  • Testik, M.C., "A Car Without a Steering Wheel: Issues in Statistical and Engineering Process Control",The Quality Management Forum, 27, 8-9 (2001).